PECK9009100 - Mack E7 ETECH / ASET Camshaft Installation Kit
Manufacturer:
PAI Industries- Mack E7 ASET • E-Tech
- Roller Tappet # 72GC373A
- Roller Tappet # 72GC266
- Cam Thrust Bearing # 702GC315
- (12) Roller Tappets
- (6) Roller Tappets
- (6) O-Ring Kits
- (12) Screws
- (1) Cam Thrust Bearing
- (1) Front Crankshaft Seal
- (12) Nuts
- (12) Nuts
- (1) Sealant
- (1) Stud
- (1) Stud
- (2) Nuts
SKU:
UPC:
Weight:
Category:
Description
Mack E7 ASET / ETECH Series Applications
Engines with EGR Valve
Complete Camshaft Installation Kit
Note
Before Roller Lifters are replaced, the “H” Rings should be inspected. The function of the “H” Rings is to accurately align the Lifter Rollers with the Cam Lobes. If the Lifters have excessive clearance, allowing misalignment, the “H” Rings must be replaced. (The “H” Rings are pressed into the block, therefore correct tooling/procedures must be used.)
After new “H” Rings are installed, the Lifters should have free vertical travel, the Rollers must be aligned accurately and minimum angular rotation confirmed. If your rings are loose in the bore, 8512-001 (.0015in Oversize) or 8512-003 (.0030in Oversize) are available to obtain a proper fit.
Warranty Information
Shipping Details:
Width:
Height:
Depth:
Weight:
Reviews:
-
There are no reviews for this product.
There are many variables with HD engine parts. To maintain quality of service for you, when you complete payment, your card is only pre-authed until we manually confirm accuracy & availability. We'll get in touch with you if necessary